After the installation of Wuxi stainless steel plate is completed, the adhesive film must be removed in a timely manner. After that, special stainless steel cleaning agents should be used to clean Wuxi stainless steel plate. The common method is to wipe it with talcum powder (double fly powder) from beginning to end, and it is best to wipe it again with clean water. It must be wiped dry. The reason why it is necessary to remove the adhesive film in a timely manner is to avoid the phenomenon of adhesive retention or, in severe cases, the aging of the adhesive film that cannot be removed.

After installation, Wuxi stainless steel plates can be promptly peeled off to detect surface issues; Prevent the infiltration of contaminated or corrosive liquids into the adhesive film, which cannot be detected, and cause serious corrosion to the board surface due to long-term exposure to humid and corrosive environments.

Protection of Wuxi stainless steel plate:

If other projects are not completed, other protective measures must be taken to protect the surface of the stainless steel plate after removing the adhesive film. Splashing cement or mortar may be the most common accidental damage on construction sites. Like other building materials, the splashed mortar should be washed away with a large amount of water before it solidifies. Otherwise, it is difficult or even impossible to remove the dry and solidified mortar from the surface of stainless steel without leaving any traces. Special cleaning agents for removing mortar from ceramic tiles should never be used on stainless steel, as they generally contain strong chemicals that corrode stainless steel.